Categories
Performance Characteristics
■ 7 inch 16: 9 TFT LCD display, resolution: 800×480 RGB
■ All the test results are shown in one page without turning to other pages
■ It is more convenient for U disk to directly save the test results,
■ Maximum test frequency is 1MHZ , resolution is 10 mHz.
■ Basic measurement accuracy is 0.05%，the ultra-fast test mode is increased (150 times / Sec)
■ Automatic level control ALC function for testing voltage or current
■ 30 Ω, 100 Ω, 10 /100, 10 /CC, four different signal sources’ output impedance.
■ Built-in comparator, 10 files sorting and file counting function
■ Internal 100 setting files are used to save or call, testing files of U disk are unlimitedly expanded to save or call.
■ Optional ±10V（±100mA） and 1 A internal DC bias source.
■ Software version of the instrument can be upgraded and updated by USB HOST.
■ U disk supports the file systems with FAT16, FAT32 format.
■ Standard RS232C、HANDLER、USB HOST，optional GPIB、LAN interface.
Brief Intruduction
■ The most popular 7-inch 800x480 color TFT LCD display is used, it is more intuitive and more comfortable for users to read test results. It is a transformer test system with high speed, high precision and high performance, which can meet the requirements of production line quality assurance, purchase inspection and laboratory measurement.
General Specifications
Operating temperature & humidity | 0°C－40°C, £90%RH | |
Power requirements | voltage | 99V-121V 198V－242V |
frequency | 47.5Hz－63Hz | |
Power loss | ≤ 80VA | |
Volume (W×H×D) | 398mm×129mm×370mm | |
Weight | about 9kg | |
Technical Specifications
Measurement function | ||
Test frequency | UC2869XB 20 Hz－200 kHz，10mHZ resolution | |
Transformer test parameter | Laps ratio, lap, phase, inductance, capacitance, leakage inductance, quality factor, AC resistance, DC resistance, balance, pin short circuit; LED test | |
Basic measurement accuracy | ||
LCRZ | 0.05% | |
DCR、Laps ratio | 0.1％ | |
Equivalent circuit | Series, parallel | |
Math function | Absolute deviation, percentage deviation | |
Range method | Automatic, hold, manual selection | |
Trigger mode | Internal, manual, external, bus | |
Measurement speed（≥1kHz） | Ultra-fast speed :150 times/Sec, | |
Average times | 1—255 | |
Delay time | 0—60s, step :1ms | |
Correction function | Open circuit / short circuit / load | |
Test end configuration | Five ends | |
Display mode | Direct reading，Δ，Δ%，V/I（Measured voltage / current monitor） | |
Test signal | ||
Output impedance | 30 Ω, 100 Ω, 10 /100, 10 /CC | |
Test signal level | normal：5 mV－2 V accuracy：10%，1 mV step | |
DC | internal | 0V，1.5V，2V，accuracy：1% |
optional | UC6802A：±10V（±100mA）DC bias current | |
UC6802B：0-1A DC bias current source | ||
Display range | ||
|Z|, R, X | 0.01m Ω — 99.9999 MΩ | |
DCR | 0.01 mΩ — 99.9999 MΩ | |
Laps ratio display range | 1:0.001-1000:1 | |
|Y|, G, B | 0.00001µS — 99.9999 S | |
C | 0.00001 pF — 9.9999 F | |
L | 0.00001 µH — 9999.99 H | |
D | 0.00001 — 9.9999 | |
Q | 0.00001 — 9999.9 | |
θ (DEG) | -179.999º — 179.999 º | |
θ (RAD) | -3.14159 — 3.14159 | |
Others | ||
 Memory | Internal 100 groups storage, unlimited expansion for U disk | |
Interface | Standard RS232C, HANDLER, USB HOST, | |
Instrument Accessories
UC6801X Scanning test box
UC26004-1 Four ends Kelvin test cable
UC26004B Two ends test cable
UC6801－01 Pedal start switch
UC26016 Scanning line
Inquiry Now
