Categories
Performance Characteristics
■ True color 4.3 inch TFT display,
■ Basic measurement accuracy is 0.1%, the maximum test speed can reach 30 times/Sec.
■ Many different signal sources output impedance that is 30 Ω,50 Ω and 100 Ω
■ Internal built 5 sorting comparator
■ Automatic level control ALC function for testing voltage or current.
■ More than 100 groups of internal settings file, U disk expand 500 groups of test files to save or call.
■ Software version of the instrument can be updated and upgraded by USB HOST
■ It is more convenient for data to be saved with U disk copy screen function; file systems with the format FAT16, FAT32 are supported
■ Standard RS232C, HANDLER, USB HOST, USBCDC, USBTMC, headphone interface, optional GPIB
Brief Introduction
■ UC2836CX is a multi-functional component tester for testing all kinds of electronic components. The most popular 4.3inch LCD display is used, it is more intuitive and more comfortable for users to read test results. 0.1% basic accuracy, high speed and low distributed capacitance, provides a high accuracy filter test requirements. Simple operation, clear test results.
General Specifications
| Operating temperature & humidity | 0°C－40°C, £90%RH | ||
Power requirements | voltage | 100 ~ 120Vac | |
frequency | 47.5Hz－63Hz | ||
Power loss | ≤ 30VA | ||
Volume (W×H×D) | 380mm×102mm×270mm | ||
Weight | About 3.6kg | ||
Ordering Information
UC2836AX/BX/CX Filter Balance tester
Instrument Accessories
UC26011B Four ends Kelvin test cable
Power cable
Optional Accessories
UC26009B SMD Test pliers
UC26008A SMD Test box
Technical Specifications
| Measurement function | |||
Model No. | UC2836AX | UC2836BX | UC2836CX |
Parameter | Ls,Lp,Q ,DCR | ||
Test frequency | 20Hz-30kHz | 20Hz-100kHz | 20Hz-200kHz |
Basic measurement accuracy | 0.1% | ||
Double Frequency Test | × | × | √ |
Equivalent circuit | Series, parallel | ||
Math function | Absolute deviation, percentage deviation | ||
Range method | Automatic, hold, manual selection | ||
Trigger mode | Internal, manual, external, bus | ||
Measurement speed（≥1kHz） | Fast speed: 75 times/Sec at most, medium speed: 12 times/Sec, slow speed: 3 times/Sec | ||
Average times | 1—255 | ||
Delay time | 0—60s, step 1ms | ||
Correction function | Open circuit / short circuit / load | ||
Test end configuration | Five ends | ||
Display mode | Direct reading，Δ，Δ%，V/I（Measured voltage / current monitor） | ||
Display | 6 bits resolution, 4.3 inch LCD display | ||
Test signal | |||
Output impedance | Optional30 Ω、50 Ω、100 Ω | ||
Test signal level | Normal :5mV-2V, accuracy：10%,Step 1mV | ||
Bias source | 0V,1.5V,2V bias voltaget,Accuracy: 1% | ||
Display range | |||
L | 0.0001 µH — 9999.99 H | ||
Q | 0.0001 — 9999.9 | ||
DCR | 0.001 mΩ — 99.9999 MΩ | ||
Others | |||
Comparator function | PASS/FAIL | ||
Memory | 100 groups of internal setting files for storage / call, external 500 groups | ||
Interface | Standard RS232C, USB HOST, optional GPIB, HANDLER | ||
Inquiry Now
